The Ostrich EggBot Kit
Beginner-friendly CNC Art Robot for larger spherical and egg-shaped objects. Now shipping version 2.0!
Not currently in production.
The Ostrich EggBot kit is a special version of The Original EggBot kit with an extra-large chassis that fits larger objects, up to 6.25" in diameter.
Both models-- the original and this extra large one --are open-source art robots capable of drawing on the surfaces of spherical or egg-shaped objects. They are descendents of the very first EggBot, designed by Bruce Shapiro, dating back to 1990.
An EggBot is super adjustable, and is designed to draw on all kinds of things that are normally "impossible" to print on. Not just eggs but pool balls, light bulbs, mini pumpkins, and even things like wine glasses. In the photos, you can see just a few of the things that you can make with an Ostrich EggBot: Incredible decorated glass balls, christmas ornaments, emu eggs, and even chicken eggs.
The Ostrich EggBot chassis is the largest EggBot model, and can only hold larger objects. It can print on egg-shaped objects from as small as a chicken egg up through (small-size) footballs and very large ostrich eggs, up to 6.25 inches (16 cm) in diameter. It also accommodates spherical objects in the range of roughly 1.6 to 6.25 inches in diameter (4 - 16 cm).
We are now shipping Ostrich EggBot version 2.0, which has been gently redesigned with a number of minor refinements and upgrades for better stiffness and performance. The chassis is CNC cut right at our shop in California, out of melamine-faced MDF, with laser engraved calibration and assembly marks. The pen and egg motors are high-torque precision stepping motors, and the pen lift mechanism is a quiet and reliable servo motor. Brass thumbscrews are provided as standard hardware.
The kit is easy to assemble in an hour or so, and only requires a couple of basic tools like miniature Phillips-head and flathead screwdrivers. You'll also need a recent-vintage computer with an available USB port (Mac, Windows or Linux), plus internet access to download assembly instructions and necessary software.
The Ostrich EggBot kit comes complete with a fully assembled and tested EiBotBoard v2.0 (EBB) USB interface/motor driver board. No soldering or programming are required. The EBB allows your computer to directly control the stepper and servo motors. The onboard 16X microstepping driver chips along with the 200 step/revolution stepper motors give a combined resolution of 3200 steps/revolution in both axes. A universal-input plug-in power supply (9 V 1.5 A) is included with the EggBot kit, as is a USB cable. The EggBot is normally controlled through a set of open-source extensions to Inkscape, the excellent, popular and free vector graphics program. Basic operation is much like that of a printer driver: you import or make a drawing in Inkscape, and use the extensions to plot your drawing onto whatever object you've mounted in the EggBot. It's all handled through an easy to use graphical user interface, and works cleanly on Mac, Windows and Linux.
The standard pen holder included with the EggBot kit is designed to fit various art pens including Sharpie Ultra Fine Point pens. However, it can actually fit almost any pen (or pencil, or crayon, or just about anything else) of similar size. If you want to use a pen that doesn't fit, the pen holder is made of wood and can be enlarged to suit your taste. (Extras and blanks can also be found here on our index of EggBot accessories.)
You can even fit a lot of things that aren't pens. A common application of the Ostrich EggBot is using a pencil to mark up an egg for later carving with handheld tools. We also offer an electric kistka attachment for traditional wax-resist egg decorating, as well as a diamond point engraving tool, capable of etching and engraving hard materials like glass, stone, and ceramic.
If you have additional questions about EggBot kits, you may want to look at the EggBot FAQ. If you're not sure which EggBot to get, please see our EggBot Model Comparison Guide. Ostrich EggBot documentation is hosted at the Evil Mad Scientist Wiki, and you may also be interested to see the documentation there for the (standard size) Original EggBot Kit.
You may also be interested in...
An EggBot is super adjustable, and is designed to draw on all kinds of things that are normally "impossible" to print on. Not just eggs but pool balls, light bulbs, mini pumpkins, and even things like wine glasses. In the photos, you can see just a few of the things that you can make with an Ostrich EggBot: Incredible decorated glass balls, christmas ornaments, emu eggs, and even chicken eggs.
The Ostrich EggBot chassis is the largest EggBot model, and can only hold larger objects. It can print on egg-shaped objects from as small as a chicken egg up through (small-size) footballs and very large ostrich eggs, up to 6.25 inches (16 cm) in diameter. It also accommodates spherical objects in the range of roughly 1.6 to 6.25 inches in diameter (4 - 16 cm).
We are now shipping Ostrich EggBot version 2.0, which has been gently redesigned with a number of minor refinements and upgrades for better stiffness and performance. The chassis is CNC cut right at our shop in California, out of melamine-faced MDF, with laser engraved calibration and assembly marks. The pen and egg motors are high-torque precision stepping motors, and the pen lift mechanism is a quiet and reliable servo motor. Brass thumbscrews are provided as standard hardware.
The kit is easy to assemble in an hour or so, and only requires a couple of basic tools like miniature Phillips-head and flathead screwdrivers. You'll also need a recent-vintage computer with an available USB port (Mac, Windows or Linux), plus internet access to download assembly instructions and necessary software.
The Ostrich EggBot kit comes complete with a fully assembled and tested EiBotBoard v2.0 (EBB) USB interface/motor driver board. No soldering or programming are required. The EBB allows your computer to directly control the stepper and servo motors. The onboard 16X microstepping driver chips along with the 200 step/revolution stepper motors give a combined resolution of 3200 steps/revolution in both axes. A universal-input plug-in power supply (9 V 1.5 A) is included with the EggBot kit, as is a USB cable. The EggBot is normally controlled through a set of open-source extensions to Inkscape, the excellent, popular and free vector graphics program. Basic operation is much like that of a printer driver: you import or make a drawing in Inkscape, and use the extensions to plot your drawing onto whatever object you've mounted in the EggBot. It's all handled through an easy to use graphical user interface, and works cleanly on Mac, Windows and Linux.
The standard pen holder included with the EggBot kit is designed to fit various art pens including Sharpie Ultra Fine Point pens. However, it can actually fit almost any pen (or pencil, or crayon, or just about anything else) of similar size. If you want to use a pen that doesn't fit, the pen holder is made of wood and can be enlarged to suit your taste. (Extras and blanks can also be found here on our index of EggBot accessories.)
You can even fit a lot of things that aren't pens. A common application of the Ostrich EggBot is using a pencil to mark up an egg for later carving with handheld tools. We also offer an electric kistka attachment for traditional wax-resist egg decorating, as well as a diamond point engraving tool, capable of etching and engraving hard materials like glass, stone, and ceramic.
If you have additional questions about EggBot kits, you may want to look at the EggBot FAQ. If you're not sure which EggBot to get, please see our EggBot Model Comparison Guide. Ostrich EggBot documentation is hosted at the Evil Mad Scientist Wiki, and you may also be interested to see the documentation there for the (standard size) Original EggBot Kit.
You may also be interested in...
Home > Products > The Original Egg-Bot Kit > EggBot Accessories
